TUTTOCHROMAME KIT STD TC20 Black Primer — Chromame Dubai
Highly efficient
nanotechnological
chrome spray coating

TUTTOCHROMAME KIT STD TC20 Black primer

Добавить в избранное
Добавить в избранное
Click to rate this post!
[Total: 1 Average: 5]

3700,00  AED

On order

TuttoChromameTM Std TC20 is a easy to apply spray on coating system that produces a mirror silver chrome finish It is an alternative to conventional electro chrome plating, PVD and electro-plating expecially for large object and meets the highest technical and decorative standards and performance requirements. 95% Spherical Reflectivity.

Buy in 1 click

Description

TuttoChromaMe™TCseries is a mirror coating system for technical and decorative applications,on any kind of material surface rigid or pliable.

  1. TuttoChromaMe™ Spray-on Coating System produces a mirror-like (95% spherical reflection), mirror
    finish on any kind of surface. (metal, plastic, rubber, glass, ceramics, wood, leather, concrete etc.)
  2. It has a flawless shining chrome finish but it also feels just like real metal plating
  3. It has an excellent resistance to abrasion, corrosion UV light, temperature, and severe soling
    phenomena.
  4. The spray on coating system is a viable alternative to conventional electro chrome plating, PVD
    (Physical Vapor Deposition) and UV Photo-polymerization tech and meets the highest technical and
    decorative standards and performance requirments
  5. Unlike conventional metal plating TuttoChromaMe™ is very simple to apply and does not require any
    investment on costly coating equipment. It is HLPV airless spray on paint that dries immediately and
    is protected by a transparent top coat that can be colored to achieve any decorative and creative
    effect.

Click to rate this post!
[Total: 1 Average: 5]

Characteristics

Code TUTTOCHROMAME KIT STD TC20 Black primer Unit Qty Mix Ratio COVER sqm/l
TUT.PRI. IC100B TUTTOPRIMER IC100B - black 1 kg 8-10
TUT.CAT. IC80 TUTTOCATALYST IC80 0,8 kg 80%
TUT.STD.TC20 TUTTOCHROMAME STD TC20 1 L
TUT.TOP.MT300 CLEARTOP MT300 (Glossy finish) 1 kg
TUT.CAT. MT934 CLEARCATALYST MT934 0,4 kg 40%

For a matte finish, instead of CLEARTOP MT300 and CATALYST MT934, use CLEARTOP MT800 - Matt finish and SCUDO 8 SC Anti-fouling

Instruction

1 step. Surface Preparation

  • For pitted surfaces, carefully sand and level using medium/course grit paper (400-600) to maximize smoothness and flatness.
  • Remove any contamination with SCUDOPICKLING 100AB solvent cleaner, especially for metal surfaces.

2 step. Primer Application

  • Apply TUTTOPRIMER IC100B (100%) + TUTTOCATALYST IC80 (80%) mix ratio 5:4 using an HLVP spray gun (or normal spray gun) with nozzles 1.2-1.3 mm at a nozzle pressure of 1.50 bar (217.5 psi).
  • Shake well before use. Let it dry at 60°-70°C for 70 minutes, then allow it to rest for 30 minutes, or at ambient temperature (20-25°C) for 12-24 hours. Ensure drying in a clean, dust-free environment and avoid touching coated surfaces.

3 step. Chrome Application

  • Shake well the 1K TUTTOCHROMAME STD TC20 before pouring it into the HLVP spray gun.
  • Use nozzles sized 1-1.2/1.3 mm at a nozzle pressure of 1.50 bar.
  • Apply three layers of TUTTOCHROME with crossed strokes until the surface is completely covered. Recommended spraying from bottom to top and then cross left to right.
  • Let it dry at 60°-70°C for 70 minutes. For optimal results, attend at ambient temperature for 24 hours. The longer the solvents evaporate, the higher the reflectivity (up to 90%-95% spherical reflectivity).

4 step. Top Coat Step

  • Apply CLEARTOP MT300 (100%) + CLEARCATALYST MT934 (40%) mix ratio 5:2 with an HLVP spray gun (or normal spray gun) with nozzles 1.2-1.3 mm at a nozzle pressure of 150 bar (2175 psi).
  • If special coloring is required, add CME Pigments to CLEARTOP MT300 (100%) + CLEARCATALYST MT934 (40%) according to the specified mix ratio % for each CME Pigment on the bottle label.
  • Let it dry at 60°-70°C for 1 hour or at room temperature for 12-24 hours. The product can be handled and packaged after 3 hours. Always apply a second layer of CLEARTOP MT300 (100%) + CLEARCATALYST MT934 (40%) after color coating for a high-quality, glossy, and durable finish.
  • For a matte finish, instead of CLEARTOP MT300 and CATALYST MT934, use CLEARTOP MT800 - Matt finish and SCUDO 8 SC Anti-fouling

Delivery

Free
Pick up
City Tower 2 Office 6, 14th Floor (north) Sheik Zayed Road Dubai U.A.E
+971 54 246 2694
Mon - Fri 9:00 - 18:00

Payment Methods

For your convenience, we have provided several types of payment, which you can use:

Payment in cash upon receipt of goods

The payment will be made to the courier upon receipt of the goods or at the pickup point.

Cashless payment for businesses

You make a 100% prepayment of the order value based on the invoice issued. This payment method is only available for businesses. The payment is made based on the invoice, which will be sent to you via email after the order has been processed by the operator.

Compare Wishlist Cart
+971 54 246 2694
info@cyndux.com Request call