ScudoChromaMe™ 502MT is a 2K superhydrophobic anti-corrosion anti-soiling protective top coating designed for protecting metals and chrome-plated surfaces, especially in marine and desert environments.
Extensive testing indicates that the product is effective both on boats and on offshore above-water installations as well as heat-intensive soiling desert applications.
The top-coat preserves the original shine of surfaces and reduces the need for maintenance or polishing and it’s nano structure prevents soiling and buildup of dust and dirt particles. The highly uniform surface features of coated mirrors show no measurable loss in specular reflectance.
Product Information
Transparent : Maintains the original appearance of the metal
Rust Inhibitors: Chemically active for ultimate rust protection.
UV- Stabilizers: Ensures long lifetime of the coating
Excellent Adhesion: The product has an ultra solid bond directly to all metal surfaces
Chemical Resistance : Resistant to oil, grease, petrol, saltspray and also to the most solvents such as
methyl ethyl ketone (MEK)
Temperature resistance: -40°C – 150 °C
Omni-phobic; hydrophobic
Anti abration: Resists denting and scratching even in very high-wear areas
Anti stain: Does not get stained by finger prints in handle and hand rail applications
Click to rate this post!
[Total: 3 Average: 5]
Characteristics
PRODUCTS
Qty
(kg)
Price (AED)
SCUDOANTIFOULING 502MT- MetalTop-
Matt
1
1150.00
SCUDOCATALYST 8SC -Antifouling
0,3
650.00
Video
Instruction
SURFACE
PREPARATION
Remove any contamination that could interfere with the top coating adhesion.
Prior to applying ScudoChromame 502MT Metaltop it is mandatory to thoroughly clean the metal surface with the special solvent SCUDOPICKLING 502MT
DO NOT use any other solvent or pickling agent as the adhesion of ScudoChromeP4e 502PT Metal top CAN NOT be guaranteed.
CATALYSER
(Hardner)
SCUDOCHROMAME 502MT IS A 2K PRODUCT
Mix Cathalysed ratio 5:2 SCUDOCHROMAME 502MT (100%)+ SCUDOCATALYST 22AF (40%) Shake well before use.
APPLICATION
METHODS
Brush; Roller HVLP Airless spray gun - only PROFESSIONAL USE
Nozzle tip 1,3 -1P5 mm Pressure at nozzle (minimum) 300 bar /4351 psi
OPERATING
ENVIRONMENT
502PT should be applied in a clean temperature and humidity controlled environment. Recommended conditions for application are 20 - 25°C (68 - 77°F) and 30 - 60% relative humidity.
DRYING & CURING TIME
5°C
10° C
23°C
40° C
Surface (touch) dry: The state of drying when slight pressure with a finger does not leave
24 h
24 h
12 h
6 h
Dried /cured in dying oven at 60°
Drying and curing times are determined under controlled temperatures and relative humidity below 85 %, and at average of the DFT range for the product.
Pot life after catalyzer mixing is max 2 hours
Temperature limit during application: MIN 1D"C - P4AX 40"C. Allow product to cure thoroughly before applying the next layer. Product must be perfectly dry before exposure to fog, rain or frost.
STORAGE
INSTRUCTIONS
Packaging
Tin cans 1 kg ; 5kg ; 20 kg
Shelf life
Storage temperature min 3°C max 40°C - keep away from direct sunlight
Product Stability
SCUDOCHROMAME 502MT 5 years in original package SCUDOCATALYST 22AF 3 years in original package
Safety Instructions
Read MSDS Material safety data sheet carefully before using products
CAUTION. This product is for professional use only. The applicators and operators shall be trained, experienced and have the capability and
equipment to mix/stir and apply the coatings correctly and according to ChromaMe technical documentation. Applicators and operators shall
use appropriate personal protection equipment when using this product.
HEALTH AND SAFETY. Please observe the precautionary notices displayed on the container and on MSDS Material Saftey Data Sheets for each
product. Use under well ventilated conditions. Do not inhale spray mist. Avoid skin contact. Spillage on the skin should immediately be removed with
suitable cleanser, osap and water. Eyes should be well flushed with water and medical attention sought.
WARRANTY & LIABILITY LIMITATIONS. Information contained herein is accurate to the best of our knowledge. The coating properties and cured
coating properties listed herein represent typical values for AF201 and are not meant as specifications. ChromaMe Srls insists that users conduct their
own tests for applicability and fitness for any purpose. Statements concerning use of products or formulations described herein shall not be
construed as a warranty or license to infringe any patent or trademark, and no liability for infringement arising out of such use is assumed. Please refer
to ChromaMe Standard Terms and Conditions or to your Purchase Agreement with ChromaMe for the warranty coverage of ChromaMe’s
product.
For your convenience, we have provided several types of payment, which you can use:
Payment in cash upon receipt of goods
The payment will be made to the courier upon receipt of the goods or at the pickup point.
Cashless payment for businesses
You make a 100% prepayment of the order value based on the invoice issued.
This payment method is only available for businesses. The payment is made based on the invoice,
which will be sent to you via email after the order has been processed by the operator.
